LoogaBarooga
Member
- Joined
- 11 Jul 2019
- Messages
- 251
Can any drivers explain this concept to me?
It’s all about taking positive actions whilst driving on the network.Can any drivers explain this concept to me?
Is it that system the Japanese use?If it's what I think it is, we just call it press and call.
The company would like drivers to use it all the time, however personally I've found confining it's use to high workload areas (such as an ESR while running on close up yellow signals) is most helpful.
It's saying aloud the reason you are cancelling the AWS warnings as there's research that shows it helps your brain remember and reduces risk of incident.
Eg *beep* "double yellow", *beep* "ESR", *beep* "ESR", *beep* "single yellow".
Sorry, I read that totally Wrong! My bad.Just do something reactive when the magnet gives you the horn. Looks good on the tape![]()
Not exactly, they point at stuff too.Is it that system the Japanese use?
Ah yes they do. We watched a video in a safety brief about it once.Not exactly, they point at stuff too.
No my fault. Partially intentional.Sorry, I read that totally Wrong! My bad.
Just to add in, the difference to RTC is the react bit. RTC doesn't imply doing anything where as reacting does imply doing something.It's not a specific phrase I heard in my driver training but it sounds essentially like risk-triggered commentary which was heavily emphasised by my TOC, i.e. call out the signal aspect or speed restriction, etc.
Press- Aws reset, upon receiving horn.
Call - call out associated reason for horn (double yellow, ESR, Morpeth etc)
React - brake.
I was always told it’s back to front tho, as in reality you usually react first, call out then cancel Aws, but I guess React, Call Press doesn’t have as nice a ring to it!
Can any drivers explain this concept to me?
You brake, then call out the reason, then cancel the AWS?
You have 1.7 seconds to cancel the AWS before the emergency brakes come on (TPWS/AWS 4). 2.3 seconds on TPWS/AWS 2.
At my place old school drivers were told 3 seconds, most of us were told 2.7.You have 1.7 seconds to cancel the AWS before the emergency brakes come on (TPWS/AWS 4). 2.3 seconds on TPWS/AWS 2.
For that reason I would imagine it’s the usually the case that you cancel the AWS first, no? Exactly as in the first post, ‘press’ comes first. Unless the poster I was quoting is making the point that we’re constantly reacting to stimuli, therefore you can’t cancel an AWS warning until you’ve reacted to it. But in this case ‘react’ clearly has a specific meaning (i.e. take action appropriate to the warning you’ve just acknowledged and called out).
And no, you don't apply the brake before you've pushed the button, unless you were already about to brake before you went over the magnet, because you don't have time.
You have 1.7 seconds to cancel the AWS before the emergency brakes come on (TPWS/AWS 4). 2.3 seconds on TPWS/AWS 2.
Dependant on the circumstance, but personally speaking if I see a cautionary aspect in the distance I’m reacting to it. Why wait until I hit the magnet to simply press, call and then react, just heightens the risk, no?You brake, then call out the reason, then cancel the AWS?
See it, Say it, Remember it.
Or don't say it, usually remember it, until the day you don't and you go through the Red because you forgot you were approaching it.
You have 1.7 seconds to cancel the AWS before the emergency brakes come on (TPWS/AWS 4). 2.3 seconds on TPWS/AWS 2.
Absolutely. I wouldn’t be waiting till the magnet to brake in leaf fall season, I get the brake in well before the magnet. Even known slippy areas during the rest of the year, I won’t wait till the magnet before braking.Dependant on the circumstance, but personally speaking if I see a cautionary aspect in the distance I’m reacting to it. Why wait until I hit the magnet to simply press, call and then react, just heightens the risk, no?
Dependant on the circumstance, but personally speaking if I see a cautionary aspect in the distance I’m reacting to it. Why wait until I hit the magnet to simply press, call and then react, just heightens the risk, no?
Exactly that. In some places braking at the magnet can be too late.Dependant on the circumstance, but personally speaking if I see a cautionary aspect in the distance I’m reacting to it. Why wait until I hit the magnet to simply press, call and then react, just heightens the risk, no?
This.Exactly that. In some places braking at the magnet can be too late.
Agree. On a download a positive action such as braking or shutting off before a magnet could be seen as more proactive and concentration levels high.Press- Aws reset, upon receiving horn.
Call - call out associated reason for horn (double yellow, ESR, Morpeth etc)
React - brake.
I was always told it’s back to front tho, as in reality you usually react first, call out then cancel Aws, but I guess React, Call Press doesn’t have as nice a ring to it!
Yes agree entirelyThis.
It’s always beneficial to take a positive action sooner rather than later. This can be situational of course - depending on what type of signal sequence you’re on, where your red is and what the rail head conditions are at the time.
Everything is recorded so always try and show that you reacted prior to the magnet.
This is how I train my trainees and it works, just my 2 pence.