Installed to reduce the 'wear and tear' to both rail wheels and the actual track itself, presumably? Are there many such pieces of kit around the GB network, or do they tend to only get installed on certain sections of track with particular characteristics, such as on Barmouth Bridge, where track replacement is maybe trickier?Flange lubricator
They’re all over the network. Must be many hundreds if not thousands of them.Installed to reduce the 'wear and tear' to both rail wheels and the actual track itself, presumably? Are there many such pieces of kit around the GB network, or do they tend to only get installed on certain sections of track with particular characteristics, such as on Barmouth Bridge, where track replacement is maybe trickier?
Those are a relatively unusual form of guard rail, (I think using flat bottom rail rotated 90 degrees), and the wheels will not be in contact with them unless a derailment occurs.Looking at photos of the refurbished bridge, it seems the track is equipped with heavy-duty check-rails the whole length of the bridge:
Barmouth Bridge
![]()
© Copyright Mark Percy and licensed for reuse under this Creative Commons Licence.
hence the flange lubricators at each end. (Click on the photo to go to the larger original on the Geograph website.)
It's not easy to see from angled views taken from the adjacent walkway exactly how much clearance there is between guard rail and track. I think there is a limited gap, and with the normal degree of 'wander' a wheel-set can have I suspect that contact does occur, hence the lubricators.Those are a relatively unusual form of guard rail, (I think using flat bottom rail rotated 90 degrees), and the wheels will not be in contact with them unless a derailment occurs.
Also known as rail greasers, as if you have to work on the track near them, you find yourself absolutely covered in the stuff...Flange lubricator
I found a couple of videos of trains crossing from after the closure, seems to me there’s loads of clearance. What we really need is a view taken from the middle of the track, or taken from a train cab.It's not easy to see from angled views taken from the adjacent walkway exactly how much clearance there is between guard rail and track. I think there is a limited gap, and with the normal degree of 'wander' a wheel-set can have I suspect that contact does occur, hence the lubricators.
The railway used to have dedicated maintenance staff to look after this type of equipment.