Oh my!I wonder if they'll operate any Clitheroe to Penistone services.
Oh my!I wonder if they'll operate any Clitheroe to Penistone services.
Given the determination of spotters that every item of motive power has to have a nickname, I propose it be 'Fnarr-fnarr' for the Class 69s, so that all those who are making jocular remarks about something that the vast majority will undoubtedly never have actually experienced can get it out of their system and move on...![]()
Elsewhere (or possibly this thread) someone suggested Ying-yangs which is both SFW and works on two levels...Given the determination of spotters that every item of motive power has to have a nickname, I propose it be 'Fnarr-fnarr' for the Class 69s, so that all those who are making jocular remarks about something that the vast majority will undoubtedly never have actually experienced can get it out of their system and move on...![]()
I agree. Subtle genius when you think about it...Elsewhere (or possibly this thread) someone suggested Ying-yangs which is both SFW and works on two levels...
Given the determination of spotters that every item of motive power has to have a nickname, I propose it be 'Fnarr-fnarr' for the Class 69s, so that all those who are making jocular remarks about something that the vast majority will undoubtedly never have actually experienced can get it out of their system and move on...![]()
Trying to drag this thread back from the gutter, is there a reason why they've given them a new Class code, rather than just making them a sub code like the 73/9?
Then on to ScunthorpeOh my!
Hmm.Okay I think it's time to move on from the jokes![]()
I have heard the SEPEX/creep control on the 60s described as "earthquake mode" - an apt description I feel, having felt the vibrations at Shipley.47543 was the first loco fitted with SEPEX, and 58050 had it from new for trials, though it was later removed. All the Class 60s have it, though.
The class number will in very large part be dictated by the availability of suitable gaps in the numbering sequence, as until the recent change to 6-digit vehicle numbers for DMUs and EMUs the same 5-digit sequence was used for unit car numbers and locos. As an aside, many of the numbers in the 56xxx series are now taken by Turbostar vehicles.Hmm.
I wonder if they should’ve perhaps considered using class 65 instead?
Also, once you’ve gone up to 69, where else is there to go..?
That’s a good point.The class number will in very large part be dictated by the availability of suitable gaps in the numbering sequence, as until the recent change to 6-digit vehicle numbers for DMUs and EMUs the same 5-digit sequence was used for unit car numbers and locos. As an aside, many of the numbers in the 56xxx series are now taken by Turbostar vehicles.
Can you still get RAM upgrades?!That’s a good point.
Actually I think you may have patiently explained that to me before on a different thread somewhere?
I definitely could do with some extra memory storage at times.
But couldn’t you just alter the numbers so that it still says 10..?Can you still get RAM upgrades?!
It does illustrate what a dumb numbering system we have, though.
And to your original point about where you go once you get to 69, surely the question should be “where do you go when you get to 10” and the answer is, of course, that you go up to 11 because it’s one louder.
These go to 11....But couldn’t you just alter the numbers so that it still says 10..?
What was the reason in choosing 56s instead of 58 or 60s?
I know the US has a wider loading gauge but their locos in general have a walkway each side which is wider than a class 58 walkway.In addition to the earlier comments, the narrower body of a 58 may make a conversion more difficult or impossible.
Would an EMD 710 (or alternative in a similar power range) even fit in a 58 bodyshell at all?
On a minor point of order, SD40-2s have 645 engines as standard, although Wikipedia says a small number have been rebuilt with 710s. I don't think it affects your point though, since I think the external dimensions of the engine blocks are identical.ps To further the discussion, a SD40-2 has an engine hood width of 7ft which contains a 710 engine. A class 58 has a cab width of 8' 11". If the walkways on a 58 are around 1ft wide there is no problem. Anything more would need to be looked at.
Okay I think it's time to move on from the jokes![]()
An early 710 should fit but the later ones (UIC2 / Euro3a) have more pipe work (e.g. split cooling systems) so would without the adjusting the non structure body work. Anything fitted now would be EuroIIIA.In addition to the earlier comments, the narrower body of a 58 may make a conversion more difficult or impossible.
Would an EMD 710 (or alternative in a similar power range) even fit in a 58 bodyshell at all?
710 block /engine are slightly tallerOn a minor point of order, SD40-2s have 645 engines as standard, although Wikipedia says a small number have been rebuilt with 710s. I don't think it affects your point though, since I think the external dimensions of the engine blocks are identical.
Given the determination of spotters that every item of motive power has to have a nickname, I propose it be 'Fnarr-fnarr
Given the determination of spotters that every item of motive power has to have a nickname, I propose it be 'Fnarr-fnarr' for the Class 69s, so that all those who are making jocular remarks about something that the vast majority will undoubtedly never have actually experienced can get it out of their system and move on...![]()
Only if the tracks are straight.I wonder if they'll operate any Clitheroe to Penistone services.