Yep - there's a load of Sunday trains that have that one in as a passenger stop. It's where the Northbound slow line merges in to the fast.I see "Holme Junction" (I think?) as a stopping point between Huntingdon and Peterborough on NRE sometimes.
Yep - there's a load of Sunday trains that have that one in as a passenger stop. It's where the Northbound slow line merges in to the fast.I see "Holme Junction" (I think?) as a stopping point between Huntingdon and Peterborough on NRE sometimes.
That explains it - thank you.Yep - there's a load of Sunday trains that have that one in as a passenger stop. It's where the Northbound slow line merges in to the fast.
Yes, Bakerloo Line. (I'm doing some train bashing there tomorrow photographing these departure boards, but unfortunately I'll not be there at the time when the trains to London Road Depot actually run.)On the Bakerloo?
They show the TIPLOC on the summary boards. The platforms don't show them, they flash up "Passing service"
There are a few stations that use "Empty to Depot" as a destination too.I've seen the screens at Huddersfield advertise an early morning departure to Empty Stock. Not entirely convinced it wasn't shown for the benefit of staff due to travel pass on it.
Sure human errors happen, the question I would have is why is there apparently no validation that the activity code is compatible with the location.As with any system, human error can occasionally result in one of the passenger activity codes being input at a non-passenger location.
At the moment....Sure human errors happen, the question I would have is why is there apparently no validation that the activity code is compatible with the location.
That will be because the pathing stop there wasn't surpressed properly. It sometimes also happens with Salford Crescent, when the overnight services reverse there.Slightly off topic, but I seem to remember last year (or possibly the year before), that on a certain day (Sunday probably), TPE Redcar services were shown on screens and announced as calling at Salford Central (it technically passes/stops at it but there are no platforms on the route taken from the ordsall chord.)
It's probably happened, at one time or another, at almost every location where trains have been planned to stop. It shouldn't, but when planners are trying to shift bids of >1,000 trains in a week it's understandable how some slip through the net. Especially at locations like Salford Central which is a passenger stop, but only on certain lines.Slightly off topic, but I seem to remember last year (or possibly the year before), that on a certain day (Sunday probably), TPE Redcar services were shown on screens and announced as calling at Salford Central (it technically passes/stops at it but there are no platforms on the route taken from the ordsall chord.)
Seen this a few times on the 334s and 385s internal displays as well.On one occasion saw this with “Newbridge Jn” listed as a stop on Helensburgh Central to Edinburgh via Airdrie/Bathgate line on the boards at stations.
It’s happened recently at St Pancras where ECS Eurostar services to Temple Mills have been displayed on the CIS as bound for TMREUKL (Temple Mills Reception UK)The timing point at Stoke Tunnel (SOKEJN being it's TIPLOC), where the train stops for 1 minute, has incorrectly been input to the train schedule as a passenger stop rather than for operating purposes.
As the platform screen doesn't have that location in its list of valid stations it displays the TIPLOC instead.
TPS understands the codes - it will block them being put on a freight service (I think EDIT: just checked and it does block publication if you put a passenger code on a freight stop). It also shows them in an info panel to the planner - it's identifying that one of the 20 stops is in the wrong place that's reliant on Mk1 Eyeballs.It wouldn't surprise me if ITPS doesn't understand the codes and blanks them out and then the staff don't notice its done that and just publish the trains with these odd stops in.
That's interesting, ECS class 5s shouldn't be showing on the boards in detail but then again no doubt it's happened at times.It’s happened recently at St Pancras where ECS Eurostar services to Temple Mills have been displayed on the CIS as bound for TMREUKL (Temple Mills Reception UK)
All Eurostar services are class 9 including the ECS moves.TPS understands the codes - it will block them being put on a freight service (I think EDIT: just checked and it does block publication if you put a passenger code on a freight stop). It also shows them in an info panel to the planner - it's identifying that one of the 20 stops is in the wrong place that's reliant on Mk1 Eyeballs.
That's interesting, ECS class 5s shouldn't be showing on the boards in detail but then again no doubt it's happened at times.
Well there you go, every day's a school day.All Eurostar services are class 9 including the ECS moves.
Railtours usually have to be entered manually onto the boards, so what is displayed depends on the system and the staff member entering the information. Sometimes the destination field shows the tour's marketing name, sometimes it just shows 'Charter Train', or it can show the actual final location of the schedule.Somewhat tangentially, 'rare track' rail tours will often show the power station (or wherever) that forms the end of that train's headcode working [1] on the screens at pick up stations. Obviously, there is no station at the destination.
[1] not sure how to phrase it; at the 'destination', the headcode changes, it becomes a 'different' train so doesn't count on the pick up station departure screens
Well there you go, every day's a school day.
The letters I and O are deliberately chosen so that they can be read as ones and zeroes in Continental train numbers.Aren't Eurostars classed as 9Oxx and/or 9Ixx trains?? The LETTER O or I instead of a 0 (zero) or 1
RealTime Trains gets confused by this too: https://www.realtimetrains.co.uk/se...-2359?stp=WVS&show=passenger&order=wtt&toc=ES shows the ECS workings, not surprisingly.All Eurostar services are class 9 including the ECS moves.